Supplyline Industrial sells and supports the complete line of Meunier Technologies DICE Dosing & Chemical Feed Systems
Call or text Supplyline for 24/7 sales & support
Introduction
The DICE™ DS and DM modules are versatile units equipped with three ports on the side. These ports can be utilized for secondary pumps or additional accessories like a pulsation dampener or pressure transmitter. This guide will walk you through the process of integrating a pulsation dampener on a DICE™ DS module. The procedure is identical for the DICE™ DM module.
Tip: Always make sure there is no pressure or residual chemical inside the DICE™ unit and wear the required personal protective equipment (PPE) before proceeding with the installation.
Installation Guide
Tip: Tap the ▶ Step #
to expand or collapse more detailed instructions
Step 1: Preparation
Step 1: Preparation
Before proceeding with the pulsation dampener installation, ensure there is no pressure or residual chemical inside the DICE™ unit. Always wear the required personal protective equipment.
Step 2: Assemble the Pulsation Dampener
Step 2: Assemble the Pulsation Dampener
Assemble the pulsation dampener and install the piping supports in the desired location prior to installation.
Step 4: Install the Pulsation Dampener
Step 4: Install the Pulsation Dampener
Install the pulsation dampener in place using the piping supports.
Step 6: Complete the Installation
Step 6: Complete the Installation
Your pulsation dampener installation is now complete. If required, proceed with the pulsation dampener adjustment as per the manufacturer's manual.
✅ The pulsation dampener is now successfully installed on your DICE™ DS or DM module.
Still have Questions?
Give us a call at 484-544-0506